論文寄稿 | |||||||||
和誌/洋誌 | 論文タイトル | 発表者名 | 発表誌名 | 巻 | 号 | ページ | 掲載年月 | 支援機能名 | |
洋誌 | InAs/InGaAs-Channel HEMTs for Ultra-Low-Power LNA Applications | C.-Y. Chang, H.-T. Hsu, E. Y. Chang, C.-I Kuo, S. Datta, M. Radosavljevic, Y. Miyamoto, and G.-W. Huang | IEEE Electron Device Lett. | 28 | 10 | 856-858 | 2007年10月 | 超微細加工 | |
洋誌 | Simultaneous fabrication of nanogap gold electrodes by
electroless gold plating using a common medical liquid |
Yuhsuke Yasutake and Keijiro Kono, Masayuki Kanehara and Toshiharu Teranishi, Mark R. Buitelaar and Charles G. Smith, United Kingdom, Yutaka Majimaa | Appl. Phys. Lett. | 91 | 20 | 203107 | 2007年11月 | 超微細加工 | |
洋誌 | Temperature and bias-voltage dependences of tunneling magnetoresistance in (Ga,Mn)As-based double-barrier magnetic tunnel junctions | J. Okabayashi, M. Watanabe, T. Yamaguchi, and J. Yoshino | Journal of Applied Physics | 103 | 7 | 07A908 | 平成20年2月 | 超微細加工 | |
洋誌 | Current-driven magnetization reversal at extremely low threshold current density in (Ga,Mn)As-based double-barrier magnetic tunnel junctions | Maya Watanabe, Jun Okabayashi, Hiroshi Toyao, Takeshi Yamaguchi, and Junji Yoshino | Applied Physics Letter | 92 | 8 | 82506 | 平成20年2月 | 超微細加工 | |
洋誌 | Current-driven magnetization reversal at extremely low threshold current density in (Ga,Mn)As-based double-barrier magnetic tunnel junctions | Maya Watanabe, Jun Okabayashi, Hiroshi Toyao, Takeshi Yamaguchi, and Junji Yoshino | Physica E | 40 | 335 | 2007年 | 超微細加工 | ||
洋誌 | Pulse-Width Dependence in Current-Driven Magnetization Reversal Using GaMnAs-Based Double-Barrier Magnetic Tunnel Junction | J. Okabayashi , M. Watanabe , H. Toyao , T. Yamaguchi , J. Yoshino | J. Supercond. Nov. Magn., | 20 | 443 | 2007年 | 超微細加工 | ||
洋誌 | Interfacial microstructure and strength of steel/aluminum alloy lap joint fabricated by magnetic pressure seam welding | Kwang-Jin Lee, Shinji Kumai, Takashi Arai, Tomokatsu Aizawa | Materials Science and Engineering A | 471 | 95-101 | 2007年12月 | 計測・分析 | ||
和誌 | アルミニウム合金/鋼摩擦攪拌重ね合せ接合界面における層状組織の生成 | 渡邉満洋、大川武士、熊井真次 | 軽金属 | 57 | 11 | 536-541 | 2007年11月 | 計測・分析 | |
洋誌 | Fabrication of Graphitic Wire Structure by Electron Beam lithography | K.Takai and T. Enoki | Physica E | 40 | 321-323 | 2007年 | 超微細加工 | ||
洋誌 | One-dimensional periodic nanocrystalline silicon arrays made by pulsed laser interference crystallization | Yao Yao, Fang Zhong-Hui, Zhou Jiang, Li Wei, Ma Zhong-Yuan, Xu Jun, Huang Xin-Fan, Chen Kun-Ji, Yasuyuki Miyamoto, Shunri Oda | Acta Physica. Sinica | 57 | 8 | 印刷中 | 超微細加工 | ||
講演 | |||||||||
国内/国際 | 講演タイトル | 発表者名 | 講演会名 | 発表年月日 | 支援機能名 | ||||
国内 | ボウタイアンテナを集積したNi-InP ショットキー バリアダイオードサブTHz-THz 検出素子の作製と特性 | 辰尾佳彦, 横山亮, 青木慧俊, 鈴木哲, 浅田雅洋 | 応用物理学会講演会、28a-ZH-4 | 2008年3月28日 | 超微細加工 | ||||
国内 | 金ナノギャップ電権間に金ナノ粒子を固定した単一電子素子 | 河野馨士朗、安武裕輔、金原正幸、寺西利治、真島豊 | 春季第55回応用物理学会関係連合講演会における口頭発表 | 2008年3月27日 | 超微細加工 | ||||
国内 | 金ナノギャップ電極を用いたLu 内包フラーレンの電流-電圧特性 | 安武裕輔、河野馨士朗、梅本久、伊藤靖浩、沖本治哉、Charles G.Smith、篠原久典、真島豊 | 2007年秋季 第68回応用物理学会学術講演会 | 2007年9月8日 | 超微細加工 | ||||
国際 | Nanogap gold electrodes by electroless gold plating toward single electron transistor | Y. Yasutake, K. Kono, M. Kanehara, T. Teranishi, M.R. Buitelaar, C.G. Smith and Y. Majima | The fourth international nanotechnology conference on communication and cooperation (INC4), Nanotech in Japan, P-09, (2008) | 2008年4月14 〜17日 |
超微細加工 | ||||
国際 | Current-driven magnetization dynamics in (Ga,Mn)As-based double-barrier magnetic tunnel junctions | 岡林潤、渡辺麻耶、吉野淳二 | 第12回半導体中のスピン関連現象の物理とその応用に関する研究会(PASPS-12) | 2007年12月20 〜21日 |
超微細加工 | ||||
国内 | (Ga,Mn)Asを用いた二重障壁磁気トンネル接合における電流注入磁化反転機構 | 岡林潤, 渡辺麻耶, 吉野淳二 | 日本物理学会第63回年次大会 | 2008年3月22 〜26日 |
超微細加工 | ||||
国内 | (Ga,Mn)Asを用いた二重障壁磁気トンネル接合における電流注入磁化ダイナミクス(II) | 渡辺麻耶、岡林潤、山口武、吉野淳二 | 応用物理学会第55回応用物理学関係連合講演会 | 2008年3月27 〜30日 |
超微細加工 | ||||
国内 | (Ga,Mn)Asを用いた二重障壁磁気トンネル接合における電流注入磁化反転機構 | 渡辺麻耶,岡林潤,吉野淳二 | 第68 回応用物理学会学術講演会 | 2007年9月 | 超微細加工 | ||||
国際 | INTERFACIAL MICROSTRUCTURE OF THE IMPACT WELDED Cu - Ni AND Cu - Fe LAP JOINTS | Mitsuhiro Watanabe, Kentaro Ishiuchi, Shinji Kumai, Nobuhiro Ishikawa, Kazuo Furuya and Tomokatsu Aizawa | The Sixth Pacific Rim International Conference on Advanced Materials and Processing | 2007年11月7日 | 計測・分析 | ||||
国際 | Interfacial Microstructure of Al/Cu Lap joints Welded by Magnetic Pressure Seam Welding |
Shuhei Kajiyama, Mitsuhiro Watanabe, Shinji Kumai and Tomokatsu Aizawa | The Sixth Pacific Rim International Conference on Advanced Materials and Processing | 2007年11月7日 | 計測・分析 | ||||
国内 | 電子線励起発光顕微法による1次元プラズモニック結晶の観察 | 鈴木喬博、山本直紀 | 日本結晶学会年会 | 2007年12月2日 | 超微細加工 | ||||
国内 | 電子線励起発光法による表面プラズモン分散の測定 | 山本直紀,鈴木喬博 | 日本物理学会第63回年次大会 | 2008年3月23日 | 超微細加工 | ||||
国内 | 1次元プラズモニック結晶のハンド構造 | 鈴木喬博,山本直紀 | 日本物理学会第63回年次大会 | 2008年3月24日 | 超微細加工 | ||||
国内 | 金属フォトニック結晶からのSmith-Purcell放射II | 加藤雅博,山本直紀 | 日本物理学会第63回年次大会 | 2008年3月26日 | 超微細加工 | ||||
国内 | 1次元プラズモニック結晶による表面プラズモン-光変換の角度分解測定 | 鈴木喬博,山本直紀 | 第55回応用物理学関係連合講演会 | 2008年3 月28日 | 超微細加工 | ||||
国内 | 「レーザー蒸着法により作成された薄層グラファイトの構造および電子輸送」 | 高井和之,西村康寛,榎敏明 | 日本物理学会第63回年次大会 | 2008年3月23日 | 超微細加工 | ||||
国内 | 「端をもつグラフェンの構造および電子輸送物性」 | 西村康寛,高井和之,榎敏明 | 日本物理学会第63回年次大会 | 2008年3月23日 | 超微細加工 | ||||
国内 | 温間バルジ成形によるマグネシウム合金製T継手の製造法開発(第一報)― 押出し材の機械的特性と結晶組織 ― | 山根康嗣,直井久,桑原義孝,生田文昭 | 第58回塑性加工連合講演会 | 2007年10月27日 | 計測・分析 | ||||
国内 | 鉄系形状記憶合金の形状回復応力特性 | 小池拓,直井久,和田学,丸山忠克 | 第58回塑性加工連合講演会 | 2007年10月26日 | 計測・分析 |